The Protimeter MMS3 is the most advanced all-in-one moisture meter.
Now, with wireless capability, the Protimeter MMS3 represents the latest in moisture measurement technology. Its ergonomic 4-in-1 design allows for fast and accurate full building moisture diagnostics both on and below the surface, from new building construction to refurbishing projects in existing buildings. Also, with built-in hygrometric capabilities and infrared (IR) laser thermometer, the MMS3 also assesses indoor air quality conditions.
The Protimeter MMS3 is a 4-in-1 instrument, ergonomically designed for easy one-handed operation, when measuring moisture in materials in buildings and related structures. It can measure surface moisture and moisture below a surface, as well as acting as a hygrometer to measure ambient air humidity. The addition of an infra-red thermometer allows the difference between dew point and surface temperature to be calculated, as well as a wide range of other important psychometric parameters. The new MMS3 will help building professionals such as surveyors, inspectors and architects to assess building moisture levels during new build and refurbishing activities and assist in the diagnoses of moisture-related problems in existing buildings.
When consise and accurate environmental readings need to be reported, the MMS3 gets the job done.
Introducing the Protimeter MMS3
![]() Measure modeSurface Temperature (IR) checks surface temperature, utilizing laser pointer, calculates proximity to dewpoint. |
![]() Search modeSurface Temperature (IR) checks surface temperature, utilizing laser pointer, calculates proximity to dewpoint. |
![]() Built-in hygrometerMeasures or monitors buildings for adequate ventilation affecting indoor air quality and moisture problems. |
![]() Infrared thermometerSurface Temperature (IR) checks surface temperature, utilizing laser pointer, calculates proximity to dewpoint. |
Features
- Pin moisture measurement with built-in calibration check
- Improved non-invasive moisture measurement with sensitivity mode feature and simple field calibration
- Non-contact surface temperature measurement with Infrared (IR) laser pointer
- Manual and automatic data logging up to 10,000 records
- File viewer mode to view logged data
- Data reporting and processing through Protimeter PC software
- Live data stream over Bluetooth, data log into file or embedded into an image in Protimeter app
- Web interface to view the logged data
- Easy-to-use interface with colour display and multi-language capability
- Firmware upgradable
The ability to record readings instantly at the push of a button makes this instrument ideal for many applications including:
- Fire & flood restoration
Four-In-One Moisture Measurement System
Measures moisture in wood and wood floors, drywall, concrete and concrete block, stucco, plaster, masonry and other building materials.
Search mode
Search (non-invasive mode) behind ceramic tile, fine finishes, water stains, tile and vinyl floor coverings, wood, drywall, plaster, masonry, concrete and concrete block.
- Non-invasive pinless radio frequency finds moisture up to 3/4 in (19 mm) below surface
- Search mode not adversely affected by surface moisture
Measuring mode
Measure (pin mode) diagnoses the extent of moisture intrusion for damage assessment and monitor drying out of building structures.
- Use built-in pin or plug in the heavy duty moisture probe for measuring in hard-to-reach areas
- Use deep wall pin-type probes to measure moisture in walls, wall cavity insulation, sub and surface structures
- Use accessories such as hammer probes to measure at depth
Humidity mode
Hygrometry measures or monitors buildings for adequate ventilation affecting indoor air quality and moisture problems.
- Measures relative humidity and temperature, dew point and surface temperature, surface proximity to dew point (condensation) and grains per pound, as well as multiple psychrometric calculations
- Allows measurement of equipment such as dehumidifiers
- Measures equilibrium relative humidity in concrete floors using the in situ probe method
- Use to detect conditions for mold and fungus growth, that can lead to unhealthy living conditions
Surface Temperature
Surface Temperature (IR) checks surface temperature, utilizing laser pointer, calculates proximity to dewpoint.
Specifications | |
---|---|
Operating Temperature: | 32°F to 122°F (0°C to 50°C) |
Hygrostick Data (Nominal): | 30% to 40% (±3%) RH at 68ºF (20ºC) 41% to 98% (±2%) RH at 68ºF (20ºC) 32°F to 122°F (-10°C to 50°C) ±0.6°F (±0.3°C) |
Quikstick & Quikstick ST Data (Nominal) | 0% to 10% (±3%) RH at 68°F (20°C) 10% to 90% (±2%) RH at 68°F (20°C) 90% to 100% (±3%) RH at 68°F (20°C) 32°F to 122°F (-10°C to 50°C) ±0.6°F (±0.3°C) Nominal Response: 30% to 90% |
Moisture Measurement Range: | Pin (%WME): 6% to 100% (Readings over 30% are relative.) Non-Invasive (RF): 60 to 999 Relative, up to 3/4” (19 mm) deep in standard mode and up to 5” (12 cm) deep in sensitivity mode (varies with material under test.) |
Data Storage: | Manual & Automatic Logging: Store up to 10,000 results in the device with date & timestamp from all instrument functions. |
Maximum Needle Depth: | 0.4 in (10 mm) |
Display: | • 2.4” TFT Color Display • 320 x 240 Resolution • Backlight with adjustable brightness • Outdoor Mode |
Power: | 2 x AA Alkaline Batteries ~ 2700mAH |
Operating Temperature: | 32°F to 122°F (0°C to 50°C) |